One Roller High Speed Roll Copy Paper Cutting Machine
Key words: Machine
DETAILS
One Roller High Speed Roll Copy Paper Cutting Machine Model DTCP-A4
Introduction of One Roller High Speed Roll Copy Paper Cutting Machine
1. Non-shaft paper rising shelves of the ground controlling system------Two sets
2. Advanced tension controlling system ------ Four sets.
3.Four sets of anti-warping mechanisms------Four sets.
4. Longitudinal cutting knife groups------six sets.
5. Simultaneous cross-cutting knife groups-----One set.
6. High-speed paper feeding system----- One sets
7. Low-speed paper feeding system----- One sets
8. Waste paper automatically discharging system-----One set.
9. Making papers in order of 2D oscillation,
srew rod lifting device of paper reams collecting system------One set.
10. PLC reams of paper counting device------One set.
11. Paper reams longitudinally and transverse discharging equipment-----One set.
12. PLC error alarm machine haulting system and PLC controlling equipment ------One set.
Main Technical Parameter One Roller High Speed Roll Copy Paper Cutting Machine:
Gross width |
846mm |
Net width |
840mm |
Number of cutting |
1 rolls 4 slittings-A4 210mm(width) |
Diameter of paper roll |
400-1200mm |
Diameter of paper roll's core |
3"(76.2mm)-6(152.4mm) |
Paper grade |
High grade copy paper,writing paper, two-side offset paper etc. |
Weight of paper sheet |
60-100g/ |
Length of paper cutting |
A4(297mm) |
Paper quantity |
0-500pages |
Ream height |
65mm(Max) |
Designing speed of paper cutting |
160m/min |
Times of cutting |
538/min |
Cycle time of ream exhausted |
4.3/min |
Production speed of paper cutting |
130m/min |
Times of cutting |
437/min |
Cycle time of ream exhausted |
3 Cycles/min(5-6 reams/min) |
Load of paper cutting |
(max)400g/m2(4×100gm2) |
Paper cutting accuracy |
±0.2mm(Permissible error) |
Paper cutting condition |
1. Speed not change 2.Paper roll with no breakage 3. Qulified paper rolls. |
Transmission |
AC Frequency conversion,stepless speed regulating |
Main power source |
3phase/4line/380v/50Hz |
Adjustable voltage |
220V AC/22V DC |
Installed capacity |
22KW |
Air consumption |
300NL/min |
Pneumatic pressure |
(Min)0.6mpa---(Max)0.8mpa |
Overall dimension(cutting machine) |
16000*2750*2100mm |
Overall Weight |
12T |
Related products
Welcome to leave a message for consultation